What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
Last Updated: 26.06.2025 01:25
I post the exact comment here.
so, what happens?
This device then solves the entire problem.
New Covid strain hits holiday hotspots as three new symptoms flagged - Cork Beo
but this device (an Inductor) … impedes the rapid changes in the current.
The MOV will conduct when the voltage exceeds 50% of line voltage.
The third is lightning and “how it gets conducted into a home.”
Why did lobsters evolve bright colors if they are neither poisonous nor venomous?
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
This is 'the assistant's answer'
(Dc diagram shown, AC is similar).
Police take back statement dismissing hate crime in gay actor’s killing - The Washington Post
But… the neutral is now “floating” because of the 1 ohm resistance.
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
How can I use AI to create custom music to accompany my vocal song or poetry?
He then asserts :
2024–10–14 [Omar Gharbi Omar Gharbi ]
Because the load is inductive, the current lags the voltage.(by a bit).
Apple Has a Huge Siri Problem That WWDC 2025 Probably Won’t Fix - Gizmodo
2024–10–10[John johnson John Johnson ]
So, the voltage could go up to 500 volts, and the fuse will not open up.
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
Google reportedly plans to cut ties with Scale AI - TechCrunch
Barnstars:
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
This is the picture of an electronic coil of wire wound around a core of magnetic material.
But it can get overloaded, and no longer works.
These devices are installed between the “hot” and “neutral” and protective ground.
Upvotes:
One
Edit 2024–10.
An AC voltage/ current source, and an ac inductive load.
Stellar Blade More Than Doubles Sony’s Previous Steam CCU Record for Single Player Games - Wccftech
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
[image of Common-mode choke]
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
Oy: United Jet Flies Wrong Route Departing SFO, Causes Near Disaster - One Mile at a Time
nine
In schematic diagrams this is the symbol for a fuse:
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
A circuit breaker is similar, but is resettable.
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
what exactly is a ‘surge’ protector?
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
At least they know the answer if they wanted it.
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
For this case there are devices called Metal oxide varistors (MOV).
This is where the MOV conducts again, and dissipated the energy.
First Sentence:
the problem then depends on "how fast does the fuse operate?".
The other is “what does a “fuse” do?”
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
but I think this circuit , shows a few more pieces.
It also is a device that limits the change in current flow.
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
2024–10–16 [ OO OLAOYE OYEBODE ]
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
These are simplified answers to the original question, and does not change anything I wrote above.
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
The bolt then partially travels down the line to your home.
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
It seems Mohan does not understand the difference between a comment and an Answer.
a photo is worth a thousand words.
He then describes the function of a fuse.
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
What does a fuse do?
[old diagram got deleted by accident]
There are two important concepts here.
This is where this question deviates from being a 'generic' question, and becomes more specific.
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
At one ohm, the resistor has a maximum of 1 watt power.
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
What is lightning?
He then describes Rainy Season and Lightning.
This one hit behind the barn.
eight
There are three different concepts here that are getting confused.
Here is a simplified AC power diagram.
A fuse is a non-resetable over current circuit protector.
Now when you have a certain ac resistance, then a current flows in a loop.
One is “what exactly is in a ‘surge protector’ ? ”
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
Can the fuse protect the electronic devices from lightning instead of a surge protector.
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.